Home > Kitchen > Tall > Standard >

1 door pantry tall cabinet

Alternative Views:

Retail Price $1,195.95

Sale Price + Options: $663.95

Product Code: T1D

Cabinet Size (tall cabinets)

WIDTH*:

HEIGHT*:

DEPTH*:

Doors and Drawer Fronts

Hinge Side*:

Click to view another Door and Drawer Front Style

Door and Drawer Front Style*:

Click to view another Door and Drawer Front Wood Type

Door and Drawer Front Wood Type*:

Door/Drawer Front Prefinishing*:

Click to view another Glass Door Prep

Glass Door Prep*:

Slide Out Shelves

Pull Out Shelves*:

Advanced Options

Click to view another Toe Kick

Toe Kick*:

Notes (room ID or custom tag):

Qty:

Description

This pantry cabinet was designed to allow another cabinet to be stacked on top of it. So long as the DEPTH and WIDTH are the same, the LOWER and UPPER cabinets will stack on top of each other and can be attached using standard 1 1/4" wood screws or staples.

*Please note that for cabinet doors over 60" tall, a three panel configuration will be used for additional structural support on the cabinet door. For example, if you order the pantry cabinet at 64" Height, then the door will be just under 60" tall. That door will have two panels separated by a single mid rail (just like in the sample picture above). If this cabinet is ordered at 70" tall, then the door will be over 60" in height. In this case wee will use a door made of three panels with two horizontal rails separating each panel. The extra rail will keep the door structural sound.

Features
Custom Cabinets - Made In Oregon using globally sourced materials

Standard Cabinets Construction (the interior is not visible once doors/drawer are closed)

All cabinets are shipped ready to assemble (i.e. flat packed)
Full overlay (flush look) frame-less construction (European style, confirmat screw assembly, no glue or additional tools needed, just a screwdriver)
Full access (maximum storage capacity with no wasted space)

Materials
Doors are custom made and hand sanded in Oregon using high quality hardwoods.
Cabinet Cases are made in Oregon using globally sourced 3/4" thick birch plywood. Veneer is an ultra durable, baked-on UV clear finished real wood Birch veneer. Plywood core is a 3/4" thick core (11 ply, 9 ply, or 7ply, depending on availability).
Drawer Boxes are made in Oregon using globally sourced 5/8" solid Rubberwood finger joint lumber (clearcoat finished in a matte sheen, shipped fully assembled and notched for under-mount drawer slides, *dovetailed drawer box joints are left raw wood and will not have a finish applied).

Hardware
Hinges are made in North Carolina, Blum "Clip Top" Blumotion (soft closing, self closing)
Drawer slides are Globally sourced, Under-mount, Soft-Close, full Extension, 75lbs capacity
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)
*Knobs and Pulls are not included with any of our cabinets

Notes
*Construction holes will be visible on the sides, top, and bottom of the cabinet once assembled.
**Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »