Home > Kitchen > Base > Fillers >

Slim base cabinet filler (for use in tight cabinet locations)

Alternative Views:

Retail Price $44.95

Sale Price + Options: $24.95

Product Code: BSLIMFILLER

Size

WIDTH*:

HEIGHT*:

DEPTH*:

Doors and Drawer Fronts

Door and Drawer Front Wood Type*:

Door/Drawer Front Prefinishing*:

Advanced Options

Notes (room ID or custom tag):

Qty:

Description

This is a slim filler for use in areas where space is tight. Use this filler between the wall and the cabinet run. This filler is edge banded on one edge. The top, bottom, and back sides of the filler are exposed (no banding will be applied, raw plywood will be showing). *this filler is 4.5" deep, from front to back. This allows the filler to be run from the floor to top of the base cabinet and cover the wall at the toe kick area. Example:
Anytime you have a run of cabinets that dies off into a wall, you would use a filler to effectively space the cabinet away from the wall by at least 2" (2" is the most common filler width). The walls of your home will be off a little in terms of being plumb and level. The filler will act as a transition piece from an imperfect wall to a perfectly square cabinet. In addition, fillers are used to allow the doors to operate properly without rubbing the wall, as well as make the cabinet look more built into place.

*The backer piece on the base filler is 3.75" wide and made from veneered plywood. This means that with the base filler dropping to the floor, it will cover the void behind the filler creating a solid filler look.

**Backer and face of filler are shipped un-assembled. Customer to pin nail face of filler to the front edge of the backer piece on site at install.

Features
Custom Cabinets - Made In Oregon using globally sourced materials

Standard Cabinets Construction (the interior is not visible once doors/drawer are closed)

All cabinets are shipped ready to assemble (i.e. flat packed)
Full overlay (flush look) frame-less construction (European style, confirmat screw assembly, no glue or additional tools needed, just a screwdriver)
Full access (maximum storage capacity with no wasted space)

Materials
Doors are custom made and hand sanded in Oregon using high quality hardwoods.
Cabinet Cases are made in Oregon using globally sourced 3/4" thick birch plywood. Veneer is an ultra durable, baked-on UV clear finished real wood Birch veneer. Plywood core is a 3/4" thick core (11 ply, 9 ply, or 7ply, depending on availability).
Drawer Boxes are made in Oregon using globally sourced 5/8" solid Rubberwood finger joint lumber (clearcoat finished in a matte sheen, shipped fully assembled and notched for under-mount drawer slides, *dovetailed drawer box joints are left raw wood and will not have a finish applied).

Hardware
Hinges are made in North Carolina, Blum "Clip Top" Blumotion (soft closing, self closing)
Drawer slides are Globally sourced, Under-mount, Soft-Close, full Extension, 75lbs capacity
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)
*Knobs and Pulls are not included with any of our cabinets

Notes
*Construction holes will be visible on the sides, top, and bottom of the cabinet once assembled.
**Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »