|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a simple cabinet that has no door. The interior will be prefinished birch plywood and the face of the cabinet case will be whichever wood type and finish you select from the order form.
|
This is an exposed interior TALL cabinet. This cabinet is made with raw wood (i.e. the interior is not finished/uv coated). The wood species is selected in the "door wood type" option field.
|
This is a blank, no door, pantry cabinet. The interior will be exposed to the clearcaoted birch veneered plywood. The face of the cabinet will be banded with your choice of wood type and finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a simple cabinet that has no door. The interior will be pre-finished maple plywood and the face of the cabinet case will be whichever wood type and finish you select from the order form. Warning: If you plan to order doors for this cabinet separately, the customer is responsible for all measuring and hinging aspects of this cabinet and the door itself.
|
This is a standard base cabinet with one door and one bottom drawer. The adjustable shelf is full depth and adjustable up and down.
|
This is a standard base cabinet with one door and one drawer. The adjustable shelf is full depth and fully adjustable up and down.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a standard base cabinet with one door and one drawer. This cabinet will contain tray dividers in the lower portion of the cabinet behind the doors.
|
This is a base cabinet with 2 drawers below the single door above. Both of the lower drawer/fronts will be equal in height. The adjustable shelf is full depth and fully adjustable up and down.
|
This is a base cabinet with 2 drawers above the single door below. Both of the top drawer/fronts will be equal in height, and will both be affected by the slab/panelized option selected on the order form. The adjustable shelf is full depth and fully adjustable up and down.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a standard base cabinet with one door. The 2 adjustable shelves are full depth and fully adjustable up and down.
|
This is a base cabinet with a single door. There are 2 adjustable shelves inside this cabinet. This cabinet is designed to work in very tight locations were space is a concern. This cabinet works well as a tray storage cabinet or in place of a wide filler next to appliances.
Disclaimer:
1. If you order this cabinet with a raised panel door style, and a width of 7" or smaller, then there is not enough room for a raised panel on the door. We will automatically use an inset (flat panel) if the cabinet is ordered under 7" in width. This applies only to raised panel door styles.
2. This cabinet does not have a front toe kick (kick plate). You will need to use a toe skin to cover the face of the toe kick if you order this cabinet with a standard recessed toe kick. See picture below.
3. This cabinet has a single 3/4" thick plywood back. It does not come with the standard 1/4" thick back panel like other standard cabinets, so this will change the way you assemble this cabinet. Please see the pictures below as the back is attached using confirmat screws.
|
This is a single door base cabinet pre drilled with mounting holes for a heavy duty mixer lift (RAS-ML-HDCR). This cabinet includes the mixer lift kit and the custom sized shelf to hold the mixer. This cabinet does not include the actual mixer and any electrical cutouts that may be required to power the device. Consult your electrician for all electrical requirements.
*DO NOT ORDER with a rollout if you select a cabient HEIGHT under 34.50" tall. Rollout may interfere with the mixer lift hardware.
This cabinet is specifically designed to work with kitchen aid mixers like the one shown below:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a single door base cabinet with tray dividers behind the door. Please measure your trays to ensure that they will fit into the cabinet prior to ordering. Tray opening is a 20" tall (i.e. you can fit tray up to 20" tall into this cabinet). The interior depth (measurement from front of the cabinet case to the inside of the cabinet back panel) is the total cabinet DEPTH minus 1". For example, if you order this tray divider cabinet with a DEPTH of 24", then the interior depth of the cabinet will be 23". Cabinet depth of 24-26" is recommended.
|
This is a 1 door wall cabinet that is hinged on top. The door will flip up when opened. The hinges used are standard hinges and therefore will not hold the door in the open position.
|
This pantry cabinet was designed to allow another cabinet to be stacked on top of it. So long as the DEPTH and WIDTH are the same, the LOWER and UPPER cabinets will stack on top of each other and can be attached using standard 1 1/4" wood screws or staples.
*Please note that for cabinet doors over 60" tall, a three panel configuration will be used for additional structural support on the cabinet door. For example, if you order the pantry cabinet at 64" Height, then the door will be just under 60" tall. That door will have two panels separated by a single mid rail (just like in the sample picture above). If this cabinet is ordered at 70" tall, then the door will be over 60" in height. In this case wee will use a door made of three panels with two horizontal rails separating each panel. The extra rail will keep the door structural sound.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a tall cabinet with a single door. This cabinet is designed to work in very tight locations were space is a concern. This cabinet works well as a tray storage cabinet or in place of a wide filler next to appliances.
Disclaimer:
1. This cabinet does not have a front toe kick (kick plate). You will need to use a toe skin to cover the face of the toe kick if you order this cabinet with a standard recessed toe kick.
2. This cabinet has a single 3/4" thick plywood back. It does not come with the standard 1/4" thick back panel like other standard cabinets, so this will change the way you assemble this cabinet. Please see the pictures as the back is attached using confirmat screws from the rear.
3. Please note that for cabinet doors over 60" tall, a three panel configuration will be used for additional structural support on the cabinet door. For example, if you order the pantry cabinet at 64" Height, then the door will be just under 60" tall. That door will have two panels separated by a single mid rail (just like in the sample picture above). If this cabinet is ordered at 70" tall, then the door will be over 60" in height. In this case wee will use a door made of three panels with two horizontal rails separating each panel. The extra rail will keep the door structural sound.
|
This is a standard upper cabinet with 1 door.
*If this cabinet is ordered with a HEIGHT over 48", then it will receive a two panel door configuration (each door will have two panels separated by a horizontal rail - maintains strength of door while minimizing warping and bowing).
|
This is a slim single door wall cabinet. Use this cabinet for very tight spaces where the total width of the cabinet needs to be less than 9" wide.
*If this cabinet is ordered with a HEIGHT over 48", then it will receive a two panel door configuration (each door will have two panels separated by a horizontal rail - maintains strength of door while minimizing warping and bowing).
Disclaimer:
1. If you order this cabinet with a raised panel door style, and a width of 7" or smaller, then there is not enough room for a raised panel on the door. We will automatically use an inset (flat panel) if the cabinet is ordered under 7" in width. This applies only to raised panel door styles.
2. This cabinet has a single 3/4" thick plywood back. It does not come with the standard 1/4" thick back panel like other standard cabinets, so this will change the way you assemble this cabinet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a 1 drawer base cabinet. This cabinet is great for bench applications.
|
NOTES
This is a single drawer wall cabinet. It is typically used in a tall cabinet stack where this cabinet is stacked on top of other wall or base cabinets to achieve a desired tall cabinet combination.
Disclaimer:
Raised panel door style can only be used when the drawer front is over 7" tall. If you order this cabinet under 7.25" tall, then we will automatically substitute a flat inset panel for the raised panel on the drawer front.
|
This is a glass door TALL cabinet with 1 glass door. The interior of this cabinet will be the same wood species as the cabinet door wood species. For example, if you choose "cherry" for the wood type, then the interior will also be "cherry". Exposed interior cabinets (e.g. glass door cabinets, cabinet with no door, etcs) will have an unfinished/raw wood interior that can be stained on site to match the cabinet door stain.
*the glass panel is not included with the glass cabinet door
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Trash pullout= 1 (trash pullout will come fully assembled and ready for installation)
Trash cans= 2 gray trash cans (35 qt capacity each)
NOTES
The trash pullout is always made from Baltic plywood with our standard dovetailed joint construction. The drawer guides for the trash pullout are always Blumotion soft closing slides (slide configuration cannot be modified). It is shipped out fully assembled, sanded, and is ready for installation once you have assembled the cabinet case and installed the drawer guides. The Servo Drive (self opening feature) is available as an option. The Servo Drive is not a standard feature.
|
Trash pullout= 1 (trash pullout will come fully assembled and ready for installation)
Trash cans= 1 gray trash cans (35 qt capacity each)
NOTES
The trash pullout is always made from Baltic plywood with our standard dovetailed joint construction. The drawer guides for the trash pullout are always Blumotion soft closing slides (slide configuration cannot be modified). It is shipped out fully assembled, sanded, and is ready for installation once you have assembled the cabinet case and installed the drawer guides. The Servo Drive (self opening feature) is available as an option. The Servo Drive is not a standard feature.
|
This cabinet includes one trash pullout with bins included (2 x 35 qt trash bins in grey). Above the trash rollout you will have one hidden rollout near the top of the cabinet. The trash pullout is always made from Baltic plywood with our standard dovetailed joint construction. The drawer guides for the trash pullout are always Blumotion soft closing slides (slide configuration cannot be modified). It is shipped out fully assembled, sanded, and is ready for installation once you have assembled the cabinet case and installed the drawer guides. The Servo Drive (self opening feature) is available as an option. The Servo Drive is not a standard feature.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Trash pullout= 1 (trash pullout will come fully assembled and ready for installation)
Trash cans= 2 gray trash cans (50 qt capacity each)
NOTES
The trash pullout is always made from Baltic plywood with our standard dovetailed joint construction. The drawer guides for the trash pullout are always Blumotion soft closing slides (slide configuration cannot be modified). It is shipped out fully assembled, sanded, and is ready for installation once you have assembled the cabinet case and installed the drawer guides. The Servo Drive (self opening feature) is available as an option. The Servo Drive is not a standard feature.
|
This cabinet includes one trash pullout with bin included (1 x 50 qt trash bin in grey). The trash pullout is always made from Baltic plywood with our standard dovetailed joint construction. The drawer guides for the trash pullout are always Blumotion soft closing slides (slide configuration cannot be modified). It is shipped out fully assembled, sanded, and is ready for installation once you have assembled the cabinet case and installed the drawer guides. The Servo Drive (self opening feature) is available as an option. The Servo Drive is not a standard feature.
|
This cabinet includes one trash pullout with bin included (1 x 35 qt trash bins in grey). Above the trash rollout you will have one hidden rollout near the top of the cabinet. The trash pullout is always made from Baltic plywood with our standard dovetailed joint construction. The drawer guides for the trash pullout are always Blumotion soft closing slides (slide configuration cannot be modified). It is shipped out fully assembled, sanded, and is ready for installation once you have assembled the cabinet case and installed the drawer guides. The Servo Drive (self opening feature) is available as an option. The Servo Drive is not a standard feature.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a standard 2 door and 1 drawer base cabinet.
|
This is a standard 2 door and 1 drawer base cabinet with a bottom location for the single drawer.
|
This is a base cabinet with two top drawers over a pair of cabinet doors. It comes with a single full depth adjustable shelf.
|
|
|
