Home > Kitchen > Base > Fillers >

Base cabinet filler

Alternative Views:

Retail Price $53.95

Sale Price + Options: $29.95

Product Code: BFILLER

Size

WIDTH*:

HEIGHT*:

DEPTH*:

Doors and Drawer Fronts

Door and Drawer Front Wood Type*:

Door/Drawer Front Prefinishing*:

Advanced Options

Notes (room ID or custom tag):

Qty:

Description

This is a standard base cabinet filler. Widths are adjustable by 1/4" increments. Use a base cabinet filler between a base cabinet and a wall. Attach the base cabinet filler to the unfinished end of any of our base cabinets to allow that cabinet to tie into the wall. Fillers are banded on the left and right sides, the top and bottom of the filler are exposed (no banding will be applied).

*The backer piece on the tall filler is 2" deep and made from veneered plywood (not edge banded). Total depth of this filler is 2 3/4".

**Base fillers are recommended to be ordered at 30.50" tall and attached to standard base cabinets with a height of 34.50".

***Fillers come already fully assembled with a 2" wide backer already attached. Simply attach the "L" shaped filler to the wall cabinet and install up against a wall.

Features
Custom Cabinets - Made In Oregon using globally sourced materials

Standard Cabinets Construction (the interior is not visible once doors/drawer are closed)

All cabinets are shipped ready to assemble (i.e. flat packed)
Full overlay (flush look) frame-less construction (European style, confirmat screw assembly, no glue or additional tools needed, just a screwdriver)
Full access (maximum storage capacity with no wasted space)

Materials
Doors are custom made and hand sanded in Oregon using high quality hardwoods.
Cabinet Cases are made in Oregon using globally sourced 3/4" thick birch plywood. Veneer is an ultra durable, baked-on UV clear finished real wood Birch veneer. Plywood core is a 3/4" thick core (11 ply, 9 ply, or 7ply, depending on availability).
Drawer Boxes are made in Oregon using globally sourced 5/8" solid Rubberwood finger joint lumber (clearcoat finished in a matte sheen, shipped fully assembled and notched for under-mount drawer slides, *dovetailed drawer box joints are left raw wood and will not have a finish applied).

Hardware
Hinges are made in North Carolina, Blum "Clip Top" Blumotion (soft closing, self closing)
Drawer slides are Globally sourced, Under-mount, Soft-Close, full Extension, 75lbs capacity
All needed hardware for assembly is included with your order (includes assembly screws, shelf pins, hinge plates, etc)
*Knobs and Pulls are not included with any of our cabinets

Notes
*Construction holes will be visible on the sides, top, and bottom of the cabinet once assembled.
**Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.

Share your knowledge of this product. Be the first to write a review »